Our company also provides other special engineering plastic profiles and products with heat resistance above 200℃, mainly including polyphenylene sulfide PPS, polysulfone PSU (PSF), polyetherimide PEI, polyether sulfone PES, polyamide-imide PAI, polybenzimidazole PBI and special plastic composite modified materials.

I. Polyphenylene sulfide PPS: 

1. Injection molding, machining molding of PPS parts: we can produce various PPS parts by injection molding and machining according to customer drawings or sample requirements.

2. The production of a variety of specifications PPS rod, sheet, pipe.

(1). Rod: diameter Ф4-220mm. 

Color: white, black.

(2) Plate: (thickness) between 1-150mm. 

Color: white, black.

II. Polyetherimide PEI: 

1. Injection molding, machining molding of PEI parts: we can produce various PEI parts by injection molding and machining according to customer drawings or sample requirements.

2. Production of a variety of specifications PEI rod, sheet, pipe.

(1) Rod: diameter Ф4-220mm.

Color: amber, black, yellow, green, red, gray. 

(2) Plate :(thickness) between 1-150mm. 

Color: amber, black, yellow. 

(3) Antistatic PEI: plate (thickness) between 1-150mm.

Color: black, etc. 

III. Polysulfone PSU/PSF: 

1. Injection molding, machining molding of PSU/PSF parts: we can produce various PSU/PSF parts by injection molding and machining according to customer drawings or sample requirements.

2. Production of a variety of specifications PSU/PSF rod, sheet, pipe.

(1) Rod: diameter Ф4-220mm.

Color: light yellow and transparent.

(2) plate: thickness between 1-150mm. 

Color: light yellow and transparent.

IV. Polyether sulfone PES: 

1. Injection molding, machining molding of PES parts: we can produce various PSU/PSF parts by injection molding and machining according to customer drawings or sample requirements.

2. Production of a variety of PES rod, sheet, pipe.

(1) Rod: diameter Ф4-220mm. 

Color: yellow and transparent.

(2) Plate: thickness between 1-150mm. 

Color: yellow transparent, white.

V. Polyetheramine imide Torlon-PAI:

1. Injection molding, machining molding of PAI parts: we can produce various PAI parts by injection molding and machining according to customer drawings or sample requirements.

2. The company can provide a large number of imported polyamide-imide PAI profiles:

Rod: Φ6.4, Φ7, Φ8, Φ10, Φ13, Φ19, Φ26, Φ35, Φ38, Φ52, etc., brownish green.

Plate: (thickness): H5, H7, H10, H13, H14, H20, H26, H30, etc., brownish green/egg yellow. 

VI. Polybenzimidazole PBI:

1. Injection molding, machining molding of PBI parts: we can produce various PBI parts by machining according to customer drawings or sample requirements.

2. The company can provide a large number of imported polybenzimidazole (PBI) profiles.